Chainsaw User Manual

Page 27 — English

Fig. 40

ROTATE CLUTCH COVER LOCK

KNOB CLOCKWISE TO SECURE

CHAIN

TENSIONING DIAL

CLUTCH COVER

LOCK KNOB

MAINTENANCE

The chain is correctly tensioned when there is no

sag on the underside of the guide bar, the chain is

snug, but it can be turned by hand without binding.

Ensure that the chain brake is not set.

NOTE: If chain is too tight, it will not rotate. Loosen

the clutch cover lock knob by pressing in and

slightly rotating counterclockwise, then rotate the

chain tensioning dial counterclockwise. Lift the

tip of the guide bar up and retighten the clutch

cover lock knob securely. Ensure that the chain

will rotate without binding.

Fig. 39

ADJUSTING

CLUTCH

COVER

SPROCKET

CHAIN TENSIONING

PIN HOLE

Fig. 41

Fig. 42

TIGHTEN

CHAIN

LOOSEN

CHAIN