PRICE . 15 INSTRUCTIONS and PARTS LIST 30" ROTARY TILLER for T-7 & T-8 Tractors TSy Guys IEy TINE WARRANTY HOMELIKE warrants rotary tiller tines against breakage for the period not to exceed the normal life of the rotary tiller: and will replace broken tines directly to the customer at no charge, provided broken tines are returned prepaid to the nearest HOMELIKE district office.
o Assemble the front and rear lift arm assemblies. Secure the rear Lift arm to the guide fuse assembly using the two hex nuts and quick pin provided. Screw the x 2-1/2 screw and mt to the side of the transmission. Hook the single looped end of the spring into the niff asses-— bly and using 2 proper fool, hook the second loop around the protruding resew previously installed. NOTE: The x 2-1/2 screw replaces the existing 3/8 screw in the side of the transmission. j l]// MOUNT IN.
5 s\i 0 Assemble and mount belt guard and belt stop as shown . LUBRICANT SON There is one grease fitting at the top of the transmission case. This fitting should be lubricated every 4 hours of operation with a good grade of general purpose automotive grease. Occasionally apply & few drops of lubricating oil to all points indicated ., S GREASE FITTING WHIZ LOCK NUT, BELT TENSION Adjustment of belt tension is regulated hy the distance be~ tween the transmission housing and the clutch lever assembly.
HOUSING and TINE GROUP No. Part No. Qty. No. Description Part No. Qty. 1 BOLT-carriage, x 1/2 ML-08237-00 10 10 TINE BLADE ML-81520-02 8 2 NUT-full hex, ML-00173-72 20 11 TINE BLADE (L. H.) ML-81520-01 8 3 WASHER-lock .
HITCH and LIFT GROUP No. Description Part No. Qty. Wo. Description Prut No. Qty.
