Use and Care Manual

Doc. ID.: 290 Date: 2-5-2021
Rev.0
CLIMATE MAINTENANCE:
• Care should be taken to control temperature.
• Extreme temperature changes may result in unacceptable thermal expansion or contraction of the flooring. Acceptable
temperature range is 60° F to 80° F.
• Extreme humidity changes may result in unacceptable expansion or contraction of the flooring. Acceptable Relative
Humidity (RH) range 35% to 55%.
• Expansion may cause buckling or edge peaking. Shrinkage may result in gapping.
• Once shrinkage or expansion has taken place, the floor will not appear as it was initially installed. This is not a manufacturing
defect.
FLOOR REPAIR:
• Very light and small surface scratches can be repaired with a staining “touch up” pen of the appropriate color.
• Slightly deeper scratches can be repaired by means of colored putty and or stains. Fill the scratches with the putty. Level
with putty knife. Wipe off excess putty.
• Very deep scratches may require the replacement of the planks and professional services.