User Manual

9
REVERSING THE DOOR
You can choose to open your refrigerator to the
left or to the right. To change how the door opens,
follow the instructions below.
Important safety warning: Unplug the appliance
before assembly.
Aside from the included accessories, you will need:
Medium-sized cross screwdriver
Small slotted screwdriver
1. Make sure the refrigerator is unplugged from
the power source.
2. Open the upper door, and close the lower door.
3. Take off the protective covers on both sides
of upper cover with a Phillips screwdriver
through the back side, and keep the protective
covers.
4. Remove the 2 self-tapping screws on the left
side of door hinge, and keep them.
5. Push the door and door hinge forward.
Remove the door and keep it aside.
6. Remove the third self-tapping screw and
keep it.
7. Slightly tilt the upper hinge in order to remove
it from the door.
8. Open the lower door.
9. Remove the 2 screws and keep them.
10. Open the door in order to remove the bottom
hinge and keep it.
11. Remove the middle hinge.
12. Use a solid plug around the hole to pull it out.
Pull out the plug hole and keep them.
13. Slightly tilt the machine backward against the
wall.
14. Remove the 2 xed feet.
15. Remove the bottom hinge.
16. Assemble the bottom hinge on the other side
of the machine.
Operating Instructions