User Manual

13
Cleaning and Maintenance
The appliance should be maintained and cleaned frequently. For your safety, unplug from the socket
before cleaning.
CLEANING YOUR APPLIANCE
Dusting behind the refrigerator and on the ground will improve the cooling effect and save energy. The
interior of the refrigerator should be cleaned to avoid any odor. Follow the cleaning procedure below:
1. Unplug the refrigerator.
2. Wipe the door and door seal with warm water and mild detergent. Rinse thoroughly and dry with a
clean, soft cloth.
3. Use a mixture of warm water and baking soda (about 1-2 tablespoons per quart of water) to clean
the interior of the refrigerator.
4. Use a sponge or soft cloth and make sure to wipe excess moisture out before cleaning around the
controls.
5. Rinse thoroughly with warm water and dry with a clean soft cloth.
6. Reconnect the refrigerator when it is clean and dry.
Note:
Do not use hard brushes, wire brushes, abrasives, organic solvents, boiling water, acid, or alkaline items as
this may damage the refrigerator surface and interior. Cleansers such as soap powder, abrasive cleaning
powder, alkali cleansers, chemical cloth, thinner, alcohol, acid petroleum product and hot water may
damage the painted cover and plastics.
REPLACING INTERIOR LIGHT
The displacement of interior light Uninstall the cover and replace the light with a screwing light (E14 ,
110V/10W), Consult the following pictures:
1) Pry the bolt on the thermostat
away from the lamp shade about
2mm with the tool.
2) Meanwhile take another side as
the center to rotate the lamp shade
outwards.
3) Take out the lamp shade along
the direction of the arrow.
4) Rotate and take out the bulb in
counterclockwise direction.