Before using your COMMERCIAL ICE MACHINE, please read this manual.
BEFORE FIRST USE: To prevent any internal damage, it is very important to keep refrigeration units (like this one) upright throughout their journey. Please leave it standing upright and outside the box for 24 HOURS before plugging it in.
Congratulations on bringing home your new appliance! Don’t forget to register your product at homelabs.com/reg for updates, coupons, and other relevant information. Although greatly appreciated, product registration is not required to activate any warranty.
IMPORTANT SAFETY INSTRUCTIONS When using your hOme™ Commercial Ice Machine (appliance), basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and/or injury to persons. Incorrect operation due to ignoring instructions may cause harm or damage. • Use this appliance only for its intended purpose as described in this manual. • This Ice Machine must be properly installed in accordance with the installation instructions before it is used.
PARTS DESCRIPTION PARTS DESCRIPTION CONTROL PANEL & FUNCTIONS A. “TIMER/CLEAN” button Press this button to enter the TIMER setting program. Press and hold this button for more than 5 seconds to enter the CLEAN program. Top cover Ice bin door Water draining hose port Ice making & water tank assembly B. “ON/OFF” button Press this button to enter STANDBY mode. During Self-cleaning or Ice making program, press this button to turn off the appliance.
OPERATION OPERATION WATER CONNECTION FOR YOUR ICE MACHINE UNPACKING AND INSTALLATION 1. Remove the exterior and interior packaging. Check if all the accessories, including the instruction manual, ice scoop, water supply hose, water hose connector, and the water draining hose are inside. If any parts are missing, please contact hOme™ customer service at 1-800-898-3002. 2. Remove the tape that is holding the door, inner cabinet, and ice scoop to the appliance.
OPERATION MAINTENANCE OPERATING YOUR ICE MACHINE 1. 2. 3. CLEANING & MAINTENANCE OF YOUR ICE MACHINE Plug in the Ice Machine. The ON/OFF symbol (4) will flash in the display window. Press the “ON/OFF” button on the control panel. The Ice Machine will start to make ice cubes when the water reaches the standard level on the water tank through the electromagnetic water valve. The symbol will change to a solid light and the Ice cube symbol (2) will start rotating.
TROUBLESHOOTING MAINTENANCE CLEANING & MAINTENANCE OF YOUR ICE MACHINE NOTE: After cleaning the interior parts of your Ice Machine, install the parts to the original position, then plug in and turn on the machine. It is recommended to discard the first batch of ice. PROBLEM POSSIBLE CAUSES SOLUTION The “Water inflow and shortage” (6) indicator is on. There is no water supply. The floating ball of the water level detecting switch is blocked and cannot rise. Water flows out from the water tank.
WARRANTY MANUFACTURING INFO hOme™ offers a limited two-year warranty (“warranty period”) on all of our products purchased new and unused from hOme Technologies, LLC or an authorized reseller, with an original proof of purchase and where a defect has arisen, wholly or substantially, as a result of faulty manufacture, parts or workmanship during the warranty period.
TECHNICAL DATA ICE MAKING DIMENSIONS DIMENSIONS Exterior dimension (L x W x H ) 17.6 X 15.7 X 31.4 inches Ice Making capacity (lbs/24h) 99 lbs/24h (50˚F water supply) Interior dimension (L x W x H ) 15.4 X 11.8 X 10.6 inches Ice Storage Capacity (lbs) 33 lbs Product weight ( lbs ) 63.5 lbs Refrigerant Type &Amount R134a 240g Package dimension (L x W x H ) 20.4 X 18.7 X 34.7 inches Foaming agent /Vesciant C5H10 Package weight ( lbs ) 74.
1-800-898-3002 © 2018 hOme Technologies, LLC help@homelabs.com 37 East 18 Street, 7th Floor homelabs.com/help New York, NY 10003 All rights reserved, hOme™. Printed in China.
