Vanity Double Sink Base Cabinet Instruction Manual MODEL: VSDB60-E W REINFORCED WOOD PANEL I C G2 DRAWER SIDE PANEL - RIGHT DRAWER BACK PANEL A2 BOX SIDE PANEL - RIGHT H BOX BACK PANEL DRAWER BOTTOM PANEL D G1 DRAWER SIDE PANEL - LEFT FACE FRAME F1 DRAWER FACE PANEL J A1 BOX SIDE PANEL - LEFT F2 DRAWER FACE PANEL E B DESCRIPTION PART A1 A2 Box side panel - left Box side panel - right Box bottom panel F2 F1 TOE KICK PANEL BOX BOTTOM PANEL PART B C D E DOOR PANEL Box back panel Face f
CAUTION Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them. The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly. Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended. Do not tighten all the screws until all the adjacent parts have been properly connected.
CC Soft - close hinge x 8 Included: 1/2” Flat Head Phillips Screw x 16 Be careful the length of the screws.
INSTALLATION OVERVIEW 1 EE EE A2 A1 Use 1/2” round head phillips screw x 20 3 2 EE A2 A2 C C Use 1/2” round head phillips screw x 6 4 5 A2 B B C C Use 1/2” round head phillips screw x 6 -3-
6 7 A1 A1 B B A2 A2 C C Use 1/2” round head phillips screw x 4 8 5 95 D Inside B B A2 Use 1/2” round head phillips screw x 8 10 11 E EE B B A2 Use 1/2” round head phillips screw x 8 -4- Bottom
12 13 AA Rotate A1 A2 C 1” Flat head Phillips screw x 6 Use 5/8” flat head phillips screw x 12 15 14 AA A1 A2 Use 5/8” flat head phillips screw x 12 17 16 G2 -5- F1
18 19 G2 I F1 H G1 G2 G1 20 21 I H G1 G2 F2 F1 22 x2 23a F1 BB G2 H G1 F2 Use 5/8” flat head phillips screw x 4 Be careful of the screw type.
24a 23b F1 BB G2 H G1 I Use 3/8” flat head phillips screw x 4 Be careful of the screw type. 24b 25 26a 26b Insert the drawer on the extended runner. To secure the drawer clips with the runner, push the drawer in. Upon successful locking, a click can be heard.
26c 26d 3 3 2 2 1 To level the drawer, use the green spur gears 1 to adjust drawer left and right, the green spur gears 2 to adjust drawer up and down, and the green spur gears 3 to adjust drawer inside and outside. Ensure that the hook on each runner profile fits into the corresponding holes on the drawer back panel. 27a 26e J CC To take the drawer out, push the green clips at the same time to unlock drawer clips.
28c 28b If the door is not level when it is installed, the customer will need to turn the screw clockwise to extend the hinge or counterclockwise to shorten the hinge.
33 W 34 EE Use 1/2” round head phillips screw x 8 35 Dear customers, Thank you for purchasing our product. If you require assistance, please contact the customer service team at the retailer where you purchased the product. The customer service team will be happy to assist you.
