Quick Start Guide

What’s inside:

Security Ultra-Secure

Starter Kit

Quickstart Guide

What you’ll need:

Model No. H13014US

1x Ethernet cable

2x Power cables

• Broadband Internet • iPhone or Android phone • Home router

2x Power adapters

2x Door + Window sensors 1x Keychain remote

1x Security Shuttle 1x Infrared motion sensor1x Mini Cube HD camera

Mounting accessories

and double-sided tape

3x Batteries

(CR123A)

PAGE 1
Security Ultra-Secure Starter Kit Quickstart Guide Model No.
PAGE 2
Step 1: Assemble your hardware Unpack all of your hardware within 1-10 feet of your home router. • Connect Security Shuttle to your DHCP-enabled router with the included Ethernet cable • Connect Security Shuttle and Mini Cube HD camera to power adapters and plug them in • Add batteries to your Door + Window and motion sensors 1-10 ft Step 2: Set up your smartphone Your phone will disrupt the setup process if it goes to sleep.
PAGE 3
Step 3: Mount your devices Before you mount your sensors, see if they’re within Security Shuttle’s range. • Take your sensors to the rooms you want to use them in • Open the battery cover of each device you want to install If you get a notification that says your device has been tampered with, it’s within range. Replace the battery cover and mount the device with the included screws or double-sided tape.
PAGE 4
Troubleshooting Tips Are your devices listed in your app? If you’re having trouble installing your devices, see if they’re listed in your Home8 app: • Navigate to > Device Management to see if all your devices are listed • Tap + next to the device category and follow the on-screen instructions to add any missing devices Are your devices communicating with Security Shuttle? • If your devices don’t connect to Security Shuttle, they might be too far away.