Quick Start Guide

ManualsBrandsHome8 ManualsBackupMedication Tracking Ultra-Secure Starter Kit

What’s inside:

Medication Tracking

Ultra-Secure Starter Kit

Quickstart Guide

What you’ll need:

Model No. C63012US

1x Ethernet cable

2x Power adapters

2x Power cables

• Broadband Internet • iPhone or Android phone • Home router

1x Security Shuttle 1x Twist HD camera 1x Pillbox

2x Medication

tracking sensor

Summary of content (4 pages)

PAGE 1
Medication Tracking Ultra-Secure Starter Kit Quickstart Guide What’s inside: 1x Security Shuttle 2x Power adapters Model No.
PAGE 2
Step 1: Assemble your hardware Unpack all of your hardware within 1-10 feet of your home router. • Connect Security Shuttle to your DHCP-enabled router with the included Ethernet cable • Connect Security Shuttle and Twist HD cameras to power adapters and plug them in 1-10 ft Step 2: Set up your smartphone Your phone will disrupt the setup process if it goes to sleep. So before you register your devices, disable the autolock feature on your smartphone. You can enable it after you’ve set up your system.
PAGE 3
Step 3: Mount your devices Before you mount your cameras, see if they’re within Shuttle’s range. • Take your cameras to the rooms you want to install them in • Open the app, tap Video. If you see video, you can mount the camera. • Give your medication tracker a good shake, then navigate to > Device Management > Pillbox Sensor on your mobile app. The time stamp will update if your tracker is in range.
PAGE 4
Troubleshooting Tips Are your devices listed in your app? If you’re having trouble installing your devices, see if they’re listed in your Home8 app: • Navigate to > Device Management to see if all your devices are listed • Tap + next to the device category and follow the on-screen instructions to add any missing devices Are your devices communicating with Security Shuttle? • If your devices don’t connect to Security Shuttle, they might be too far away.