Installation Guide

ManualsBrandsHome2O ManualsBathroom Wall CabinetsAnwyn 26 W x 67 H x 9.75 D White MDF Bathroom Wall Cabinet

MODEL #HF01-SLQ-WH

#HF01-SKQ-ES

BATHROOM SPACE SAVER

Questions, problems, missing parts? Before returning to your retailer, call our customer service department at

1-877-319-3757, 8 a.m. - 5 p.m., CST, Monday - Friday.

06-01-2018www.homewerksww.com

READ AND SAVE THESE INSTRUCTIONS

Summary of content (6 pages)

PAGE 1
MODEL #HF01-SLQ-WH #HF01-SKQ-ES BATHROOM SPACE SAVER Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-319-3757, 8 a.m. - 5 p.m., CST, Monday - Friday. READ AND SAVE THESE INSTRUCTIONS www.homewerksww.
PAGE 2
TABLE OF CONTENTS Package and Hardware Contents............................................................................................................................................................................................................ 2 Safety Information........................................................................................................................................................................................................................................
PAGE 3
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Do not load this unit with more than 30 lbs. • Safely discard all packing material. • Keep small parts away from children. • The assistance of another person may be required to help install this unit. FOR SAFE AND PROPER USE TO AVOID TIPPING HAZARD: Use provided hardware to secure furniture to the wall.
PAGE 4
ASSEMBLY INSTRUCTIONS 3. 3 Attach divide panel (G) to the assembled upper middle panel (B) unit and twist the locking nut clockwise to secure in place. Attach right upper side (C) to the assembled unit and twist the locking nut clockwise to secure in place. G G C 4. Attach upper back bar (H) to the assembled unit, insert lower back panel (F) and upper back panel (E) into the groove of both upper side panel (A & B). 4 5.
PAGE 5
ASSEMBLY INSTRUCTIONS 6. 6 Attach front bar (P) to lower right side (N) and twist the locking nut clockwise to secure in place. Repeat this step for lower back bar (O). P O N 7. Attach front bar (P) to lower left side (M) and twist the locking nut clockwise to secure in place. Repeat this step for lower back bar (O). Then move the base to desired location, attach back bottom bar (Q) to the assembled unit and twist the locking nut clockwise to secure in place.
PAGE 6
ASSEMBLY INSTRUCTIONS 9. 9 Put shelf ( L) into unit. Insert shelf support (AA) into unit. Put movable shelf (K) into unit. Hardware Used AA Shelf support K x8 K L 10. INSTALLATION TO WALL 10 With the help of another person, move the assembly unit to desired location. Use a pencil (not included) to mark the pre-drilled holes on upper back bar (H) onto the wall. Set assembled unit aside. CC BB Use a 3/16 in. drill bit (not included) to drill 1/4 in. pilot holes at the marked locations.