Installation Guide

ASSEMBLY INSTRUCTIONS

Attach front bar (P) to lower right side (N) and twist the

locking nut clockwise to secure in place. Repeat this step

for lower back bar (O).

Attach front bar (P) to lower left side (M) and twist the

locking nut clockwise to secure in place. Repeat this step for

lower back bar (O). Then move the base to desired

location, attach back bottom bar (Q) to the assembled unit

and twist the locking nut clockwise to secure in place.

Note: the back bottom bar (Q) is reversible. The hard-

ware holes are work both of facing to wall or front.

Attach upper assembled unit to the base assembled unit

and twist the locking nut clockwise to secure in place.