Installation Guide

4
www.homewerksww.com
INSTALLATION INSTRUCTIONS
3.Usinga7/32in.drillbit(notincluded),drillholesthat
where marked in step 2 and insert included wall
anchors.
4. Screw included screws into the wall anchors, leaving
3/8 in. space between the screw head and the wall.
5.Followalllocalelectricalcodesandconsultaqualied
electrician. Check that the black, white and green wires
are all exposed from the mirror. Connect the white wire
on the mirror to the house white wire. Connect the black
wire on the mirror to the black house wire. Connect the
green ground wire on the mirror to the appropriate
house ground wire.
Mirror
white
green
black
House*
white
green
black
* House wires may vary in color. Please be sure to verify actual
housewireswithacertiedelectricianbeforeinstallation.
6. Insert the screw heads into the keyholes on the bracket
then carefully let the mirror drop down so that the screw
heads move into the small sections of the keyholes,
securing the mirror in place.
Turn power back on at circuit breaker or replace fuse.
OPERATING INSTRUCTIONS
Turn on wall switch to turn light and defogger pad on.
NOTE: The defogger pad will only work when light is on.
The defogger pad and light cannot be wired separately.
CARE AND MAINTENANCE
Clean periodically with a soft cloth and glass cleaner. Avoid spraying glass cleaner directly onto mirror. Avoid abrasive
cleaners and harsh chemicals as they may damage the surface of the product.