User Manual

13
TROUBLESHOOTING
Problem Cause Solution
Insufcient pressure and
amount of steam.
The steam nozzle is blocked. Clean the steam nozzle
according to the instructions
above.
No steam. Tank is empty. Fill the water tank.
Enable to press the steam
button.
The safety lock is in LOCK
position.
Press the safety lock and then
the steam button.
Water drops from steam
output.
The steam cleaner has been
tilted.
Do not tilt the steam cleaner
more than 30°.
Water tank is overlled. Fill the tank only with the
maximum amount of water
(300 ml).
If the problem is not listed in the table above or if the problem persists, switch off the appliance,
disconnect the plug from the electrical outlet and contact an authorized service centre.