User Manual

10
water in the tank will cause hot water to drip from the nozzle. If there is little water in the tank,
not enough pressure will be created, and therefore little steam. You can shorten the heating time
by pouring warm water.
Warning:
Never use the steam cleaner with an empty water tank. Use only clean water.
Using the steam cleaner
1. Attach the desired accessory to the steam cleaner and check the tank is ll with water.
2. Place the steam cleaner on a at, dry, and stable surface and insert the plug to a grounded
power socket.
3. The power on LED lights up and the steam cleaner will start heating. The heating time is
usually 4 minutes, depending on the temperature and volume of water in the tank.
4. Once the ready LED lights up, the steam cleaner is ready to use.
5. Press the safety lock and then press the steam button. Release the safety lock and it will stay
at OPEN position. The steam button is unlocked, and steam starts to ow.
6. The steam cleaner will produce steam as soon as you keep the steam button pressed. Once
it is released, the steam will stop, and the safety lock will automatically pop up to LOCK
position. The steam button will be locked.
Warning:
Be careful while using not to get scalded from the hot steam.
7. After use, release the steam button and the safety lock will automatically pop up to LOCK
position. The steam button will be locked. Disconnect the plug from the power socket.
Before other manipulation (lling water, changing accessory), allow it to cool down for at
least 5 minutes. Before cleaning, allow it to cool down completely.
Filling water
If you notice decrease in pressure and steam amount while using, it is necessary to add water to
the tank.
Warning:
Never use the steam cleaner with an empty water tank. There is a risk of total damage.
1. Release the steam button and the safety lock will automatically pop up to LOCK position.
The steam button will be locked. Place the steam cleaner on a at, dry, and stable surface.
2. Disconnect the plug from the power socket and allow the steam cleaner to cool down for at
least 5 minutes.
3. To prevent scalding from escaping steam or hot water while releasing the cap, place a dry
cloth over it.
4. Carefully release the safety cap and unscrew it anti-clockwise.
Warning:
Never release the safety cap by force. If it is not possible to release by regular, adequate power,
wait till the temperature and pressure decrease. Do not touch the metal parts of the cap. These
are very hot, and they may cause scalding when misused.
5. Pour out the rest of the water from the tank.
6. Insert the funnel in the tank neck and pour clean inside.
7. Screw the safety cap clockwise and tighten rmly.
8. Wipe the hot water drops on the steam cleaner and around it with dry cloth.
9. Insert the plug to the power socket and continue in using.