Instruction Manual

26
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcţii / SRB-MNE - Funkcije / CZ - Funkce /
HR-BIH - Funkcije
ELECTRIC FIREPLACE
FEATURES
Electric decorative fireplace with built-in fan heater for heating the atmosphere of indoor premises ● spectacular flame-
effect ● built-in LED ● 1000 W / 2000 W heating power ● thermostat • overheating-protection
OPERATION
The unit’s glass door is a simulated one only, it can not be opened.
The unit can be operated using the rocker switches located on the front left side of the appliance.
The unit may emit a slight odour when turned on initially, which is not a malfunction. It is harmless and evaporates quickly.
You can power on the appliance with the main switch (3), and flame-effect can be switched on with it as well. So the light-
effect can be activated separately, without the heating stages. Thereafter the fan-operated heating stages I (1000 W) I+II
(2000 W) can be activated by the switches.
The switch II can not switch on anything itself, it works only together with switch.
The thermostat (5) can be used to set the ambient temperature of the room. In modes I and II, the appliance will switch
on when the ambient air temperature falls below the value set. As the set temperature is reached, the fan and heating
elements turn off. If you would like to set a higher temperature, turn the thermostat right, if you want to set it lower, then
turn it left.
All function can be turned off with the main switch.
The built-in energy-saving, electronically controlled LED light source does not require replacement, can not be replaced.
In the event of overheating, the overheating protection function will switch off the unit, for example when the air inlets
and outlets are covered. Power off the unit by unplugging it from the electric outlet. Allow the appliance to cool (for at least
30 minutes). Check whether the air inlets and outlets are obstructed or not, and clean them if necessary. Switch on the
unit again. If the overheating protection activates again, power off the unit by unplugging it from the electric outlet and
contact the service facility!
SPECIFICATIONS
power supply: ..................230V~ / 50 Hz
heating stages [ ] : ......1000 / 2000 W
light source [ ]: ............... LED, 10 W, not replaceable
maximum power: ............. 2010 W
IP protection: ................... IP20: Not protected against ingress of water!
size of heater: ..................39,5 x 56,5 x 23 cm
weight: ............................. 5,2 kg
noise level: .......................50 dB(A)
ELEKTROMOS KANDALLÓ
JELLEMZŐK
elektromos látványkandalló, beépített ventilátoros fűtőtesttel, beltéri helyiségek levegőjének felmelegítésére ● hangulatos
láng-effekt ● beépített LED fényforrás ● 1000 W / 2000 W fűtési teljesítmény ● termosztát ● túlmelegedés elleni védelem
ÜZEMELTETÉS
A készülék üveges „ajtaja” csak dizájn-elem, nem nyitható.
A készülék a bal oldalán található billenőkapcsolókkal és a termosztáttal üzemeltethető.
Első bekapcsoláskor enyhe szagot érezhet, ami természetes jelenség. Veszélytelen és hamar elillan.