DELUXE 4 BURNER BBQ Assembly Instructions - Please keep for future reference 953/8559 Dimensions Width - 122cm Depth - 54cm Height - 110cm 0359 22 2575 22 Important - Please read this instructions fully before using the appliance If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800. Please visit the website www.argos.co.uk for more information. Sainsbury's Supermakets Ltd. 33 Holborn, London EC1N 2HT. Argos Limited, 489-499 Avebury Boulevard,Milton Keynes MK9 2NW.
Safety and Care Advice Important - Please read this instructions fully before using the appliance • • • • • • • • • • • • • • • • • • • • • • • • • • • Assembly time: approx. 45 mins. Requires two people to unpack and build Retain these instructions for future reference. This product is for outdoor use only. Do not use indoors. Do not use the barbecue or store gas bottles below ground level.
Safety and Care Advice The maximum dimension of the gas bottle is dia 31.5cm and height 58cm. 2 Key 1= maximum diameter 2= maximum height 1 Never mount the gas bottle under the barbecue on the base shelf as this could result in serious injury to the user, other people and/or property. Always place the gas bottle at the left or right hand side of the appliance. The hose length should not exceed 1.5 metres.
Safety and Care Advice Operation Warning • Before proceeding, make certain that you understand the IMPORTANT INFORMATION section of this manual. • Your barbecue is not designed to be used with more than 50% of the cooking area as a solid plate — this includes baking dishes. Full coverage will cause excessive build-up of heat and damage the barbecue. This is not covered by warranty.
Safety and Care Advice • • Push in and turn the control knob anti-clockwise until you feel resistance pause 4 seconds. Then continue turning the control knob until a click is heard and the burner is lit. If the burner fails to ignite after above procedure, turn the knob to the OFF position and close the gas valve. Wait 5 minutes and then repeat the above steps. If the barbecue still fails to light, please refer to the manual ignition instruction in the section below.
Safety and Care Advice End of Cooking Session After each cooking session, turn the barbecue burners to the “high” position and burn for 5 minutes. This procedure will burn off cooking residue, thus making cleaning easier. Make sure the lid is open during this process. Turning Off Your Barbecue When you have finished using your barbecue, turn all the control valves fully clockwise to the “Off” position, then switch off the gas supply at the bottle.
Safety and Care Advice Flame Tamer Remove any food residue from the flame tamer surface with a plastic or wooden scraper or brass wire brush. Do not use a steel scraper or wire brush. Clean with hot soapy water and rinse well. Drip Tray After every use, empty and clean the drip tray of any fat or food particles, using a plastic or wooden scraper if necessary. Failure to keep it clean, and excessive build up can result in a fat fire. This can be hazardous and severely damage the barbecue.
Safety and Care Advice Barbecue Lid Use a non-abrasive cloth or pad and clean with hot, soapy water. Do not use scouring pads or powders as they can permanently damage the finish. Trolley Wipe with a cloth wrung out in hot soapy water and dry. Fixings All screws and bolts, etc. should be checked and tightened on a regular basis. Storage Ensure the barbecue is properly cooled before covering or storing. Store your barbecue in a cool dry place.
Components - Parts If you have damaged or missing components, call the Customer Helpline: 03456 400800 Please check you have all the panels listed below 23 24 21 22 19 18 20 17 14 16 15 13 12 11 8
Components - Parts Please check you have all the panels listed below (L) 9 8 10 (R) 7 5 (LB) 4 3 (RB) 6 (LF) 2 1 9 (RF)
Components - Fittings Please check you have all the panels listed below Note: The quantities below are the correct amount to complete the assembly.
Assembly Instructions Step 1 4 Attention: If there is any installation problems while installing the grill, you can try to loose the tighted bolts in the previous steps to adjust the position. 2 5 3 1 Fix four legs with castors. Step 2 RB Fix four legs separately on the bottom shelf 6 using bolt A. RF LB Attention! Ensure legs are in the correct position before moving to the next step.
Assembly Instructions Step 3 7 Fix the side panel 7 to legs using bolt B. B B 8PCS Step 4 Fix the magnet E to the bottom shelf with bolt C.
Assembly Instructions Step 5 8 Fix the cart front panel 8 to the front legs using bolt A. A Do not tighten the screws completely. A 4PCS 6 Step 6 Fix the body support 9 10 to legs using bolt B.
Assembly Instructions Step 7 Put part D into the hole on the bottom shelf. D D 2PCS Step 8 Connect door 11 with cart front panel and bottom shelf using axle 12 . 12 After this step, adjust the position of the door magnet to ensure direct contact is maintained.
Assembly Instructions Step 9 Fix the door handle 13 to the door using bolt G. 13 G G 4PCS Step 10 Put the body 14 of the BBQ onto the frame, taking care to locate correctly. We recommend two people to carry out this step.
Assembly Instructions Step 11 15 Put right side table 15 between the right legs and body. Step 12 Fix the right legs, right side table and body using bolt A and B.
Assembly Instructions Step 13 16 Put left side table 16 between the left legs and body. Step 14 Fix the left legs, left side table and body using bolt A and B.
Assembly Instructions Step 15 Fix left and right tables on the body using bolts B. B B 8PCS Step 16 Tighten the screws completely.
Assembly Instructions Step 17 Align the side burner venturi against the valve, and fix them using F. Important: Make sure the valve tip goes into the burner venturi completely with good alignment. F 2 1 F 1PC Step 18 Put the side burner electrode wire into the side burner electrode.
Assembly Instructions Step 19 Put the oil cup 19 into the holder 18 and hang it on the oil pan 17 , then place the oil pan with the oil cup in the cart. 17 18 19 Step 20 Put the flame tamer the grill separately.
Assembly Instructions Step 21 Put the cooking grid 21 22 on the grill separately. 21 22 Step 22 Put the warming rack 23 the grill. Remove the protective wrap from the warming rack.
Assembly Instructions Step 23 24 Fix the thermometer 24 on the grill assembly. Put shim H between nut and thermometer. H Finally, please check and ensure that all screws are tightened H 1PC Assembly is complete. ALL JOINTS AND CONNECTIONS MUST NOW BE LEAK TESTED BEFORE USING THE BARBECUE. Leak test annually, and whenever the gas bottle is removed or replaced. Always place the gas bottle at the side of the appliance.
Technical Specification E61B34B28-SB Model Number I3+(28-30/37) Gas Category Type of Gas Gas Pressure Pin Number Propane Butane 37 mbar 28-30 mbar 0359DM00064/2575DM31328 Injector Size (Main Burner) 0.86mm Injector Size (Side Burner) 0.76mm Total Heat Input 14.5 kW 4 Burner Heat Input 12 kW Side Burner Heat Input 2.5 kW Gas Consumption 1054 g/h Country of Destination GB and IE Do not use this barbecue outside Great Britain and Ireland.
Troubleshooting Possible Cause Problem Burner will not light LPG gas cylinder is empty using the ignition sysFaulty regulator tem Obstructions in burner Obstructions in gas jets or gas hose Solution Replace with full cylinder Have regulator checked or replaced Clean burner Clean jets and gas hose Electrode wire is loose or disconnected Reconnect wire on electrode or ignition unit.
