Installation & Assembly

Line up the holes on the mounting bracket (B) with the holes on your
junction box. Using the two suitable mounting screws (D or E) attach
the mounting bracket (B) to your junction box and fix it tightly.
[phone]
HOW TO INSTALL
LED Wall Pack Light
Model No. ES00756V
sec urit y
www.homezonesecurity.com
Figure 1: Install mounting bracket
Connect the light fixture wires to the junction box wires with wire nut (C)
* Black to L wire
* White to N wire
* Ground wire to GND with GND screw
Figure 2: Connect power wire
Install the light fixture (A) to the mounting bracket (B) with center screw
(G), then cover the rubber cap (H) in the screw hole.
NOTE: Before attaching the fixture to the junction box, make sure all the
lines are in the junction box or in the fixture body.
Figure 3: Install the light fixture
Figure 1
Figure 2
Figure 3