Manualshelf

Installation & Assembly

ManualsBrandsHome Zone Security ManualsAll Security Lights & Flood Lights36-Watt LED Dusk to Dawn Battery Powered Outdoor Security Area Light with Motion Sensor Lights (Pack of 2)
12
Battery Operated Motion Sensor Light (2-pack)
(888) 782-5618
INSTALLATION AND OPERATION
Model No. ES06470V
Figure 1
Choose desired wall location. Drill two holes on the wall (use the two mounting
holes as template for the screw locations as shown in Figure 1). Insert the plastic
anchors and screw the Bracket with the the two screws into the wall tightly
INSTALL BATTERIES
1. Open the battery cover on the back of the light
2. Install three 1.5V C batteries (9) (not included) into the battery
compartment. Make sure the polarity of the batteries is correct.
3. Replace the battery compartment cover
Figure 2
Switch the unit to “ON” by using the switch on the back of the light. The light has two
operating functions by the switch:
OFF: The light is powered off.
ON: The light illuminates for 15 seconds every time at night when motion is detected.
Figure 3
There are two openings on top of the light fixture. Insert mounting plate through the
opening and push down the light fixture to snap into place.
sec urit y
www.homezonesecurity.com