User's Manual

40 • Managing TransPort
The Configuration Complete page appears. You can review the
network configuration to ensure that the changes are correct.
Click Finish to restart TransPort.
The Network Status page is displayed and shows that TransPort is
resetting.
Configuring Your Network IP Addresses
The option for Network IP Addresses allows you to change
TransPort’s IP Address and to set the Subnet Mask for your
network.
Open the Network Management Console. For instructions on
opening the Console, see page 33.
Click Network IP Addresses.
Complete the settings for the Network IP Addresses. The
setting are described in the following table:
Click Submit. The Network Management Console is displayed
with the Network IP Addresses option checked to show a
change has been made.
When you have completed all of your network changes, click
Apply Changes on the Console page.
The Configuration Complete page appears. You can review the
network configuration to ensure that the changes are correct.
Click Finish to restart TransPort.
6
1
2
3
IP Address Table
Setting Description
TransPort IP Address TransPort’s Internet Protocol address,
which is the number of a computer or
device on the Internet
Subnet mask A 32-bit number that determines how
an IP address is split into network and
host portions
4
5
6