User's Manual

30 • Managing Your Computers
Setting Encryption Keys for Computers
To set the encryption key for your wireless network, you must first
set the key on TransPort using the Network Management Console.
For this procedure, see “Setting an Encryption Key on TransPort”
on page 41. After you set up TransPort, return to this section for the
procedure to set up your computers.
On the Encryption pane of the Station Configuration Utility, you
can set an encryption or security code by entering a passphrase or a
Wired Equivalent Privacy (WEP) code. Make sure that the same
passphrase or WEP is used for all components on the network.
An example of an Encryption pane is shown below.
Use the following procedure to set your encryption for each client
computer.
Click the Encryption tab of the Station Configuration Utility
window.
1