User's Manual

26 • Managing Your Computers
Advanced Mode
The Advanced Mode of the Configuration Utility enables you to
change the default settings of your computer’s link to TransPort.
You should not attempt to change these settings unless you are
thoroughly knowledgeable of this type of configuration. Read the
instructions carefully before changing these parameters.
To access Advanced Mode, hold down the Control (Ctrl) key and
click on the TransPort icon in your system tray. In the Advance
mode you can not only view link and version information as you
can in Standard Mode, you can also change the configuration and
set security codes for your Transport network. The following
sections describe the Advanced Mode features that allow you to
adjust your network settings:
■ “Changing Your Configuration” on page 27
■ “Setting Encryption Keys for Computers” on page 30
Viewing Link and Version Information
The Link Info pane of the Configuration Utility displays
information about the status of the link between TransPort and the
computer. Click the Link Info tab to view information about your
communication connection.
In the Advanced mode, the Link information is the same as in the
Standard mode. The only addition to this pane is the Current
Channel, which displays the number of the channel used for the
link. See the Link Info table on page 23 for a description of the
information on Link Info.
Like the link information, the version information is same in both
Standard and Advance modes. Click the About tab to view this
information. See the About table on page 25 for a description of
this pane.