User's Manual

Managing Your Computers • 23
Viewing Link Information
The Link Info pane of the Station Configuration Utility displays
information about the status of the link between TransPort and the
computer. An example is shown below.
The Link Information is described below.
State
Displays the current state of the connection between the
computer and TransPort.
■ The state is linked when the computer is connected to the
network. Also displayed is the SSID (Service Set
Identification) number of the TransPort. (This is the Media
Access Controller (MAC) number and may be needed for
cable installation.)
■ The state is not linked when the computer is not connected
to TransPort. To establish a link, see “Troubleshooting” on
page 46.