User's Manual

Adding Computers to the Network • 19
Installation with Non-Airway Network
Adapters
You can use other, non-AirWay 802.11-standard adapters or
network cards for the AirWay 11 Mbps Network. However, because
other cards do not have the AirWay CD-ROM installation, you
cannot use the AirWay installation procedures.
Instead, use the adapter’s installation utility to enter the following
default settings for the AirWay 11 Mbps Network:
To set your Internet Gateway, you must log on to the Network
Management Console on TransPort:
Open your Internet browser.
Type the IP address for the Console in the address box of the
browser: http://192.168.0.1.
Follow the instructions given for “Configuring Your Internet
Gateway on TransPort” on page 17.
SSID The last eight numbers of your TransPort
serial number
Ethernet Conversion RFC1042
Encryption (WEP) Disabled
Network Mode Infrastructure, in order to link to
TransPort (Ad Hoc if you are linking to
other computers only)
1
2
3