User's Manual

14 • Adding Computers to the Network
Replace the computer case.
Connect the AirWay external antenna to the PCI card.
Plug in the computer and turn it on.
Install the AirWay 11 Mbps Network drivers and software.
Laptop Computer
Use the following procedure to install a network (PCMCIA) card in
a laptop computer.
Turn off your laptop computer.
Note:
You must have computer that supports a 3.3 VDC (Volts Direct
Current) card. The AirWay PCMCIA card uses 3.3 VDC.
Some older computers do not support this voltage; they support
only 5.0 VDC. If your computer does not support 3.3 VDC,
you will not be able to seat the cord in the PCMCIA card
socket.
Insert the AirWay network card into the card slot of the laptop.
Turn on the laptop.
4
5
6
7
1
2
3