User's Manual

78 • System Administration via the Handset
35(/,0,1$5<Y
Within Area Rules This section is used to define prefixes within
the local area code that you must dial “1” to
reach (1-xxx-xxxx).
Viewing settings for within area rules
Procedure
1. Press MENU until you reach the screen
containing the Setup function.
2. Press 9 (Setup)
3. Press 2 (Network).
4. Press 4 (Dialing rules).
5. Press 2 (Within area rules).
6. When the screen shown above is
displayed, press 0 (Ok).
7. The
handset
displays all local prefixes
where dialing 1 is required.
Adding a 1+ local prefix
Procedure
1. Press MENU until you reach the screen
containing the Setup function.
2. Press 9 (Setup)
3. Press 2 (Network).
4. Press 4 (Dialing rules).
5. Press 2 (Within area rules).