User's Manual

76 • System Administration via the Handset
35(/,0,1$5<Y
2. Press 9 (Setup)
3. Press 2 (Network).
4. Press 4 (Dialing rules).
5. Press 1 (Local area codes).
If your system is set to use 10-digit
dialing, the handset displays the screen
shown at left. Press
0 (Okay) to display
area codes where dialing 1 is not
required.
If your system is not set to use 10-digit
dialing, the handset displays the local
area code and asks if you would like to
make changes. Press 1 (Yes) to make
changes to the local area code.
6. Press
1 (Add).
7. Enter the new local area code. Press
END when finished
8. Press 1 (Yes) to confirm that the new
area code is correct, or 2 (No) to re-enter
the new area code.
9. Press 0 (Ok) when you have finished
adding area codes.
10. You will be asked if 10-digit dialing is
required at the new location. Press 1
(Yes) to set 10-digit dialing for your area.
Press 2 if your area does not use 10-digit
dialing.
Note: You may not have more than one
area code listed without activating 10-