User's Manual

74 • System Administration via the Handset
35(/,0,1$5<Y
Specifying Tone or
Pulse dialing for a
particular line
You can specify either tone or pulse dialing
for all outgoing calls on a particular line. All
calls dialed out on that line from either a
handset or a device connected to a Phone
Jack will use the specified dialing type.
Procedure
1. Press MENU until you reach the screen
containing the Setup function.
2. Press 9 (Setup).
3. Enter your system password, then press
END.
4. Press 2 (Network).
5. Press 3 (Lines)
6. Select the desired line number.
7. Press 4 (Tone) to toggle between Tone
and Pulse dialing.
Defining Dialing Rules
Dialing Rules tell the system how to dial local
and long-distance calls (for example, when
to dial “1” before an area code). These rules
were established during installation of the
first
handset
(unless specified first from a PC
connected to the network via a Data Jack).
You may find if necessary to change your
system’s dialing rules from time to time (for
instance, if a new area code is added to your
local dialing area).