User's Manual

System Administration via the Handset • 71
35(/,0,1$5<Y
3. Press 1 if the extension being configured
is a Handset, or 2 if the extension being
configured is for a data or phone jack.
4. Press 3 (Configure).
5. Enter the extension number you want to
set inbound ringing for.
Note: You can also use * and # to scroll
through the entries. When the desired
device is highlighted, press 0 (OK).
6. Press
3 (Inbound ringing).
7. Toggle the desired lines on or off by
pressing the corresponding line number.
A check mark indicates that incoming
calls on that line will ring the extension.
Setting phone line options
Setting Call
Forwarding for a
particular line
Your Home Wireless Networks
communications system allows you to
forward incoming calls on a specific line to
another external phone number. If desired, a
different external Call Forwarding number
can be set for each line in the network.
Procedure
1. Press MENU until you reach the screen
containing the Setup function.
2. Press 9 (Setup).
3. Enter your system password, then press
END.