User's Manual

70 • System Administration via the Handset
35(/,0,1$5<Y
6. Press 3 (Configure).
7. Enter the extension number you want to
set outbound line selection for.
Note: You can also use * and # to scroll
through the entries. When the desired
device is highlighted, press 0 (OK).
8. Press
2 (Outbound line selection).
9. Toggle the desired lines on or off by
pressing the corresponding line number.
A check mark indicates that the
extension can use that line for outbound
calls.
Setting inbound
ringing options
Inbound Ringing options determine which
extensions will ring during incoming calls on
each line. If desired, you can restrict certain
extensions from ringing when calls come in
on a particular line.
Example: You have three handsets on
Extensions 10, 11, and 12, and four phone
lines. One of the phone lines (Line 3) is your
800 sales line. You do not want the extension
assigned to your warehouse worker
(Extension 11) to ring with incoming sales
calls, so you turn off inbound ringing for Line
3 on Extension 11.
Procedure
1. Press MENU until you reach the screen
containing the Setup function.
2. Press 2 (Network).