User's Manual

68 • System Administration via the Handset
35(/,0,1$5<Y
Note: Pressing 2 will return you to the
“Add, Remove, Configure” menu screen.
Pressing MENU will exit the Setup
function entirely.
9. When the display reads “Handset
Removed” or (“Access Jack Removed”),
press 0.
Changing a device
name
You can change the name of a device using
the following procedure.
Procedure
1. Press MENU until you reach the screen
containing the Setup function.
2. Press 9 (Setup).
3. Enter your system password, then press
END.
4. Press 2 (Network).
5. Press 1 for a
handset
or 2 for an data or
phone jack.
6. Press 3 (Configure).
7. Enter the extension number of the
device to be renamed.
Note: You can also use * and # to scroll
through the entries. When the desired
device is highlighted, press 0 (OK).
8. Press 1 (Edit Name).
9. Use the keypad to enter the new name.
(See page 37 or page 46 for information