User's Manual

System Administration via the Handset • 67
35(/,0,1$5<Y
10. When the display reads “Handset
Added” (or “Access Jack Added”), press
0.
Removing devices
from the network
You can remove a
handset
, data jack, or
phone jack from the network by using the
following procedure. Removing a device
disables the Controller’s ability to
communicate with that device. It is a
generally a good security measure to
remove a device that has been lost.
Procedure
1. Press MENU until you reach the screen
containing the Setup function.
2. Press 9 (Setup).
3. Enter your system password, then press
END.
4. Press 2 (Network).
5. Press 1 if removing a
handset
or 2 if
removing a data or phone jack.
6. Press 2 (Remove).
7. Enter the extension number of the
device to be removed.
Note: You can also use * and # to scroll
through the entries. When the desired
device is highlighted, press 0 (OK).
8. Press 1 to verify removal of the device, 2
to end the procedure without removing
the device, or MENU to cancel.