User's Manual

36 • Installing Handsets
35(/,0,1$5<Y
Enter your Controller password, then
press 0 (OK) to continue.
Note: The default Controller password
is “4961.” You should change this
password to one of your own choosing
as soon as you finish installing and
setting up your network. The password
can be changed via either the handset
Setup menu (see “Changing the system
password” on page 61), or via a PC
connected to a Data Jack.
Note: If the Controller cannot be
located, the handset displays the
following screen:
Move closer to the Controller and press
0 to restart the handset registration
process.