User's Manual

34 • Installing Handsets
35(/,0,1$5<Y
Registering a Handset with the Controller
Before you can use a handset, it must be
registered with the network controller so the
two devices can communicate with each
other.
If you change Controllers for any reason, you
must re-register the handset with the new
Controller.
Note: Be sure to fully charge your new
handset battery before beginning the
handset registration procedure. See page 32
for information on installing and charging the
handset battery.
There are three ways to register a handset
with its Controller:
• Self-registration (registering the handset
from itself) - see the following section.
• Registering the handset from another
handset that is already installed on the
system - see page 62, “Adding devices
to the network.”
• Registering the handset via a PC
connected to a Data Jack - see page xx.