User's Manual

13
2. If you pressed 1 (YES) in the preceding step, the following screen is
displayed.
Follow the instructions on the display to enter all local area codes that do
not require “1” before dialing.
When finished, proceed to Step 6.
3. If you pressed 2 (NO) in Step 1, the following screen is displayed.
Follow the instructions on the display to enter your local area code.
4. After confirming your local area code, the following screen is displayed.
If you must dial “1” to reach any local prefixes, press 1 (YES) and proceed
to Step 5.
If you do not need to dial “1” to reach any local prefixes, press 2 (NO) and
proceed to Step 6.