Installation Guide

Assembly Instructions
2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
STEP 2
Attach Stretchers (C) and (D)
to unit with Wood Screws. (see Figure 2)
Tighten all Head Cap Bolts.
STEP 3
Turn the table over its’
upright position.
To the level the table,
adjust the adjustable levelers
on the bottom of the legs.
(see Figure 3)
B
D
B
A
B
B
B
B
B
B
B
B
B
C
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt
STEP 1
Place Table Top (A) upside down on a
soft cloth.
Attach Legs (B) to Table Top (A) with
Head Cap Bolts, Spring Washers
and Flat Washers.
Tighten Head Cap Bolts only half way.
(see Figure 1)
Figure 1
Figure 2
Figure 3
/2