Contents Introduction ..................................................... 4 Welcome ....................................................... 4 General Information and Safety Instructions ...................................................... 5 Assembly and Parts List ............................. 7 Outdoor unit ................................................ 8 Indoor unit .................................................... 9 Accessories ................................................ 10 Getting Started.
Change the Date/Time .......................... 28 Screen shots .............................................. 29 Device timing operation ....................... 29 FAQ .................................................................. 30 Other Useful Information .......................... 31 Disposal ........................................................ 31 Specifications ............................................ 32 Warranty Conditions .............................. 33 Warranty card ..................
Introduction This Digital Door Viewer helps you to protect yourself and your valuables. The screen allows you to see & communicate with whoever is at the door before having to open it. Welcome You have made an excellent choice with the purchase of this quality Home Protector product. By doing so you now have the assurance and peace of mind which comes from purchasing a product that has been manufactured to the highest standards of performance and safety, supported by the high quality standards of Aldi.
We hope you will enjoy using your purchase for many years to come. If you require technical support or in the unlikely event that your purchase is faulty please telephone our Helpline for immediate assistance. Faulty product claims made within the 3 year warranty period will be repaired or replaced free of charge provided that you have satisfactory proof of purchase (keep your till receipt safe!). This does not aff ect your statutory rights.
1. Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into this device. 2. Do not expose the Digital Door Viewer / Camera (indoor unit) to moisture or submerge it in liquid. Keep it dry at all times. 3. Flat batteries should be immediately removed from the device. Never mix old and new batteries. Always replace batteries in pairs. 4.
Assembly and Parts List Digital Door Viewer with preinstalled 128 MB Micro SD card (indoor/main unit/screen) Doorbell (outdoor unit) Metal tube Back plate Adhesive tape Screws (1 short, 2 long) Flat tool Micro SD Card (pre-installed) 2 x AA batteries 7
Outdoor unit 8
Indoor unit 9
Accessories 10
Getting Started Remove protection foam as shown below. 1. Remove any existing Door Viewer from the door.
2. If there is no Door Viewer you will need to drill a suitable hole, using a 5/8" (7mm) drill bit. 3. Peel off the adhesive cover on one side of the adhesive tape and attach it to the back of the doorbell unit. Then peel off the adhesive cover.
4. Place the doorbell unit on the outside of the door and secure it by using the adhesive tape. Ensure that the metal threading is exactly in the middle of the peephole. 5. Make sure that the connection ribbon goes through the hole.
6. Peel off the tape on the back of the mounting plate. This will help prevent scratches on your door when attaching the main unit. Place the backing unit against the door and pull the connection ribbon through the center hole.
7. Pull the connection ribbon through the center hole. 8. Use the included flat tool to twist the metal tube clockwise until it is firmly in place.
9. Press the ribbon head against the PCB (printed circuit board) for correct position. Please note that the PCB is very fragile so make sure not to press the ribbon head too hard against the PCB. Snap the PCB to the connection point.
10. Use a screwdriver to remove the faceplate from the main unit.
11. Insert two AA batteries into the unit, ensuring that you have the correct polarity. Attention For the following steps, please note that the main connection points are vital for the operation of the Door Viewer. If they are note properly connected the device will not work.
(Back of main unit) 12. Place the unit on the door so that the two parts connect securely.
13. Ensure that the unit is properly connected. 14. Using the 2 long screws provided, secure the Door Viewer using a Philips head screwdriver.
15. Place the cover on the front of the device. Use the short screw to secure the faceplate to the device.
16. The Door Viewer is now fully installed. Please note that the outdoor lens has a clear plastic cover to prevent scatches. Please remove the plastic after installation.
Features This door viewer camera allows you to see who is at the door and will provide you with a more secure feeling. It has a built-in 128 MB micro SD card that can store up to 1000 pictures of people who pressed the doorbell. The door viewer camera has a 2.4" LCD colour monitor and is easy to install.
Instructions Replacing the batteries To replace the batteries simply remove the faceplate of the main unit by unscrewing the bottom screw of the device. Remove the old batteries and replace them with two new AA batteries. Refer to steps 10 & 11 for more details. Removing the micro SD card Remove the faceplate of the main unit by unscrewing the bottom screw on the device. Remove the batteries from their position. Push the micro SD card in to release it.
Use the below diagram to assist you in the following instructions Buttons The Door Viewer comes with 4 buttons; A, B, C & D. Take a picture from the inside To monitor who is outside your door, you can press “A”, and the screen will turn on after 3 seconds. When the screen is on press “A” again to take a picture. The display will be in “Live mode” for 10 seconds and then timeout.
Take a picture using the doorbell When a visitor presses the “B”, the main device screen will turn on after 6 seconds, and automatically the unit will take one picture. The screen will stay on for an additional 30 seconds. The included 128MB micro SD card stores up to 1000 images. NOTE: The doorbell cannot be used independently. Review and delete pictures When the screen is on, press “C” to review all pictures. Scroll to see all pictures.
Change the Date/Time Once the screen is on, press “D” to adjust the date and time. Press “C” or “D” to change the date and time. Press “A” to go to the next menu. Once you have entered all the information Correctly, press and hold “A” for 3 seconds and automatically the system will store the information. IMPORTANT: Images will vary depending on surrounding light conditions.
Screen shots Device timing operation 29
FAQ Q: No picture / No video A: Make sure that the metal threading is correctly connected with the PCB board. Q: No power A: Check the batteries in the main unit. Q: Cannot save pictures/videos. A: Make sure that the micro SD card is not full.
Other Useful Information Disposal The device and the batteries must not be disposed of together with domestic waste. If you want to dispose of the device, do it the environmentally friendly way by bringing it to a public waste centre. The packaging material is partly recyclable. Dispose of the packaging in an environmentally friendly way by bringing it to a public collection centre.
Specifications • 2.4 inch colour LCD display • Suitable for door thickness 40 70mm • Outdoor unit is with 0.3M pixel camera, wide 120 degree view angle. • Includes 128MB Micro SD card to store up to 1000 pictures • Traditional melody • Powered by 2 x 1.5V AA batteries (included) • Life expectancy of batteries is approx. 5 months. • Batteries (2 x AA) weight: 0.0456 kg • Indoor unit dimensions: 78 x 30 x 113 mm • Outdoor unit dimensions: 39 x 62 x 57 mm • Combined product weight: 0.
Warranty Conditions Dear Customer, The Aldi warranty offers you extensive benefits compared to the statutory obligation arising from a warranty: Warranty period: 3 years from the date of purchase 6 months for wear parts and consumables under normal and proper conditions of use (e.g. rechargeable batteries). Costs: Free repair/ exchange or refund. No transport costs. Hotline: Free hotline ADVICE: Please contact our service hotline by phone, email or fax before sending in the device.
In order to make a claim under the warranty, please send us: • together with the faulty item the original receipt and the warranty card properly completed. • the faulty product with all components included in the packaging. The warranty does not cover damage caused by: • Accident or unanticipated events (e.g. lightning, water, fire). • Improper use or transport. • Disregard of the safety and maintenance instructions. • Other improper treatment or modification.
After the expiry of the warranty period, you still have the possibility to have your product repaired at your own expense. If the repair or the estimate of costs is not free of charge you will be informed accordingly in advance. In the event that a product is received for repair, neither the service company not the seller will assume any liability for data or settings possibly stored on the product by the customer.
services, details of which are to be found both in this manual and on the product itself. If you are not entirely satisfied with this product please return it to the store where it was purchased and we will be pleased to replace or refund it. This does not affect your statutory rights. PRODUCED IN CHINA FOR: ALDI STORES LTD. PO BOX 26. ATHERSTONE. WARWICKSHIRE, CV9 2SH. ________________________ ALDI STORE (IRELAND) LTD. PO BOX 726, NAAS, CO. KILDARE. Visit us at www.aldi.
