Installation Guide

PRE-DELIVERY INSPECTION
Vehicle Make: Vehicle Model:
Vehicle Year: Vehicle VIN#:
Vehicle FGAWR: Installing Company:
Mounting Type: Plow Type:
WingMan 6.8 7.6
Hydraulic Serial Number: Moldboard Serial Number:
Comments:
Inspected By: W.O.# Date:
Customer Signature:
All bolts torqued to specication
Suspension interference
2” Receiver height in inches
Trip springs adjusted
Lift Chain Adjusted
Check for hydraulic uid leaks
Hydraulic uid Level
Dielectric grease applied to ALL electrical connection
All wires/modules secured
Plow Stops Adjusted (plow cannot bump hyd. unit)
Controller Operation
Plow Operation Up
Plow Operation Left
Plow Operation Right
Plow Operation Down
Plow Light Blinker Left & Right Operation
Plow Light Low & High Beam Operation
Plow Lights Adjusted
Plow Mount/Dismount reviewed with Customer
Plow Operation reviewed with Customer
Warranty/Registration/Owners Manual
reviewed with Customer
(10)
Serial Number Decal Locations
Moldboard serial number is attached to the
back of the moldboard.
E-73 unit serial number is
under the cover attached to the
hydraulic unit.