Replacement Part List
STEP 1a
Attach the two wheel assemblies with the shorter brackets to
either side of the plow pivot bar (ξ g. 1 & 2) and the third wheel
assembly to the Lift Frame Assembly under the lifting cylinder.
STEP 1b
Install Plow Markers to each side of plow using 5/16-18 x 1β bolt,
5/16 ξ atwashers and 5/16-18 locknut as shown below.
STEP 1:
PLOW LIFT FRAME ASSEMBLY
(Fig. 1) (Fig. 2)
9, 12
SAFETY PRECAUTIONS -
See pages 2-3 for deξ nitions
Your HomePlow System should now look like the picture below.
(Auto-Angling with hydraulic lift shown)
4