Replacement Part List

(Fig. 37)
(Fig. 38)
(Fig. 39)
REMOVE PLOW
FROM VEHICLE
Raise plow and set wheels to storage
position ( g. 37-39). Lower plow all
the way down. On hydraulic models,
put the controller into “Float” position
and push down on lift arm to put slack
into the lift chain ( g. 40). Disconnect
electrical plug ( g. 41) and install
weather covers to both end of the
harness. Remove Hitch pin ( g. 40).
Gently lift at “Lift Here” decal ( g. 42)
and slide Lift Frame out of reciever
hitch on vehicle ( g. 43). Re-install
Hitch pin thru Lift Frame.
➊ Push here to put slack in chain
➋ Disconnect plug
➌ Remove pin
➍ Lift here and pull away from vehicle
➎ Replace pin to plow hitch
➊
➊
➋
➋
➌
➌
➍
➍
➍
➍
(Fig. 40)
(Fig. 41)
(Fig. 42)
(Fig. 43)
➎
➎
7
SAFETY PRECAUTIONS - See pages 2-3 for de nitions
10