Use and Care Manual
(Fig. 37)
(Fig. 38)
(Fig. 39)
REMOVE PLOW
FROM VEHICLE
Raise plow and set wheels to storage
position (g. 37-39). Lower plow into
“Float” position and push down on lift
arm to put slack into the lift chain
(g. 40). Disconnect electrical plug
(g. 41) and install weather covers to
both end of the harness. Remove Hitch
pin (g. 40). Gently lift at “Lift Here”
decal (g. 42) and slide Lift Frame out
of reciever hitch on vehicle (g. 43).
Re-install Hitch pin thru Lift Frame.
Push here to put slack in chain
Disconnect plug
Remove pin
Lift here and pull away from vehicle
Replace pin to plow hitch
(Fig. 40)
(Fig. 41)
(Fig. 42)
(Fig. 43)
13
7
SAFETY PRECAUTIONS -
See pages 2-3 for denitions