Instructions / Assembly
(Fig. 37)
(Fig. 38)
(Fig. 39)
REMOVE PLOW
FROM VEHICLE
Raise plow and set wheels to storage
position (g. 37-39). Lower plow all
the way down. On hydraulic models,
put the controller into “Float” position
and push down on lift arm to put slack
into the lift chain (g. 40). Disconnect
electrical plug (g. 41) and install
weather covers to both end of the
harness. Remove Hitch pin (g. 40).
Gently lift at “Lift Here” decal (g. 42)
and slide Lift Frame out of reciever
hitch on vehicle (g. 43). Re-install
Hitch pin thru Lift Frame.
➊Push here to put slack in chain
➋ Disconnect plug
➌ Remove pin
➍ Lift here and pull away from vehicle
➎ Replace pin to plow hitch
➊
➋
➌
➍
➍
(Fig. 40)
(Fig. 41)
(Fig. 42)
(Fig. 43)
➎
7
SAFETY PRECAUTIONS -
See pages 2-3 for denitions
10