Installation Guide

12 13
4.
Assemble both sets of Spring arms and
pivot arms (I) using 1/4-20 x 3/4"
and 1/4-20 Locknut. Snug fasteners
using a 7/16" box wrench and a 7/16"
ratchet wrench.
NOTE: The Pivot and Spring Arms
should be able to hinge.
5.
Drop the two spacer tubes (I) into
the A-frame (N) as shown.
6.
Drop the two compression
springs (G) into the A-frame
(N) so they end up on top
of the spacer tubes.
13
A-Frame Assembly
Parts needed: I, G, N, R, S
PLOW ASSEMBLY