Installation Guide

MIRROR BUTTONS AND FEATURES

REF# ICON BUTTON INSTRUCTIONS

Power/Mode

Press to turn the power on.

Press and hold to turn the power off.

Bluetooth

When the mirror is turned on and USB ash drive is connected, press this

button to switch between the USB Flash Drive and Bluetooth® functions.

Previous Song Press to go back to the previous song on your playlist.

Volume Down Press and hold to lower volume.

Phone

WHEN PHONE RINGS:

-Press to accept incoming calls hands-free.

-Press again to resume music.

Music

WHEN PLAYING MUSIC:

-Press to pause.

-Press again to resume music.

Next Song Press to skip to the next song on your playlist.

Volume Up

Press and hold to increase volume.

Alarm sounds when volume is at its maximum.

5 Light Press to turn mirror light on/off.

6 Bluetooth® Light

When the Bluetooth

pairing is enabled, the blue lights will ash and a voice

prompt stating "Bluetooth" will play to indicate the device is ready for pairing.

7 Built-In Mic Built in microphone for speaker phone.

MIRROR PORTS

1. USB port to connect and play MP3 music from USB Flash Drive or for charging another device when the Music Mirror is connected

to power. NOTE: Power charging rate is lower when other functions (ie. light, speaker) are in use.

2. DC power supply for connection with external adapter or computer. NOTE - When the DC and USB ports are not in use, it is important

that you leave the silicone cover on to protect them from any build-up of moisture or dust.

POWER SUPPLY

This mirror is powered by use of the USB cable supplied to a standard AC power outlet.

Output requirement: DC 5V/1200mA, Input: 100~240V~50/60Hz

BLUETOOTH

PAIRING MODE

1. When the mirror is in Bluetooth

mode, the blue LED light will ash indicating that it is ready for pairing.

2. The mirror will automatically search for available Bluetooth

devices within range. Please make sure that your wireless device

is close by and pairing is enabled.

3. Activate the Bluetooth® function on your wireless device and follow instructions for pairing.