Parts List

8
HomewerksWW.com
NEW CONSTRUCTION INSTALLATION INSTRUCTIONS (continued)
9. Attach the grille (B) by pinching the mounting springs
and inserting into the narrow rectangular slots in the
fan housing (A).
Turn on the power source. If you hear any abnormal sound
or vibration, please refer to the Troubleshooting Guide on
page 12.
9
A
B
Mounting
spring
EXISTING CONSTRUCTION INSTALLATION INSTRUCTIONS
BEFORE INSTALLATION
WARNING: RISK OF ELECTRIC SHOCK! Ensure the
electricity to the wires you are working on is shut off.
Either remove the fuse or turn off the circuit breaker
before removing the existing bath fan or installing the
new one.
1. Remove existing fan.
1
2. Measure the opening to ensure it is large enough to accommo-
date the new fan housing (9-1/4 in. x 9-1/4 in.).
2
4
5
6
7
8
9
1
0
1
1
1
3. If the opening is not large enough for the new fan housing,
cut a 9-1/4 in. x 9-1/4 in. opening for the fan housing (A).
3
9-1/4"
9-1⁄4 "