Parts List

7
HomewerksWW.com
NEW CONSTRUCTION INSTALLATION INSTRUCTIONS (continued)
5. Secure the suspension brackets (C and D) to the fan housing (A)
using machine screws (BB) (included).
Hardware Used
BB
Machine screws x 4
BB
BB
D
C
A
5
6. Remove the wiring cover. Pull the house wires through the
wiring cover hole. Using the attached quick connectors, connect
120v house wiring to the fan as shown in the wiring diagram
on page 5. 12-18 AWG is the smallest conductor that should
be used for branch circuit wiring.
Carefully push the connected wires back into the wiring box
housing. Reattach the wiring box cover.
CAUTION: If the house electrical wires do not match the
colors from the fan wiring diagram on page 5, you must
determine what each house wire represents before
connecting. You may need to consult an electrical
contractor to determine safely.
Wire
cover
Wire
cover
House
wire
Product
wire
Quick
connect
6
7. Connect a 4 in. circular duct (not included) and vent to the
outside. Secure it with duct tape (not included) or a clamp
(not included) to make the connection secure and airtight.
Finish ceiling work. Ceiling hole should be aligned with edge
of the fan housing (A).
7
A
8. Plug the connector attached to the grille (B) into the
connector on the fan housing (A).
8
A
B
Connector