Parts List

NEW CONSTRUCTION INSTALLATION INSTRUCTIONS

BEFORE INSTALLATION

WARNING: RISK OF ELECTRIC SHOCK! Ensure the

electricity to the wires you are working on is shut off.

Either remove the fuse or turn off the circuit breaker

before removing the existing bath fan or installing the

new one.

1. Installation Without Suspension Brackets

Place the fan housing (A) next to a ceiling joist or wall stud. The

fan housing (A) should be level and perpendicular to the joist or

wall stud. Allow for thickness of ceiling board or drywall used

in your application. DO NOT ush mount to joist or wall stud.

Bottom of fan housing (A) should be ush with the ceiling board

or drywall.

2. Mount fan housing (A) to the joist or wall stud using wood

screws (AA) where indicated by arrows outside the fan

body (A).

Hardware Used

Wood screws x 2

3. Installation With Suspension Brackets

Insert suspension brackets (C and D) onto fan housing (A).

Position the fan housing (A) so the edge of fan is ush with the

ceiling board or drywall. Do not ush mount the fan housing (A)

with the ceiling joist or wall stud.

4. Secure the fan housing (A) to the ceiling joists or wall studs

using wood screws (AA) (included).

Hardware Used

Wood screws x 8

HomewerksWW.com