Parts List
10
HomewerksWW.com
EXISTING CONSTRUCTION INSTALLATION INSTRUCTIONS (continued)
9. Remove the wiring cover. Pull the house wires through the
wiring cover hole. Using the attached quick connectors, connect
120v house wiring to the fan as shown in the wiring diagram
on page 5. 12-18 AWG is the smallest conductor that should
be used for branch circuit wiring.
Carefully push the connected wires back into the wiring box
housing. Reattach the wiring box cover.
CAUTION: If the house electrical wires do not match the
colors from the fan wiring diagram on page 5, you must
determine what each house wire represents before
connecting. You may need to consult an electrical
contractor to determine safely.
Wire
cover
Wire
cover
House
wire
Product
wire
Quick
connect
9
10. Connect a 4 in. circular duct (not included) and vent to the
outside. Secure it with duct tape (not included) or a clamp
(not included) to make the connection secure and airtight.
Finish ceiling work. Ceiling hole should be aligned with edge
of the fan housing (A).
10
A
11. Plug the connector attached to the grille (B) into the
connector on the fan housing (A).
11
A
B
Connector
12. Attach the grille (B) by pinching the mounting springs
and inserting into the narrow rectangular slots in the
fan housing (A).
Turn on the power source. If you hear any abnormal sound
or vibration, please refer to the Troubleshooting Guide on
page 12.
12
A
B
Mounting
spring