SDS

产品规格书 （ Product Specification ） 型号（ Model No. ） GLP503450 1000mAh 3.7V
·禁止用尖锐部件碰撞电池；
·取放电池时，请修短指甲或戴上手套；
·应清洁工作环境，避免有尖锐物体存在
4.2 Folding edge
The folding edge is form in battery process and passed all hermetic test
·Don’t open or deform folding edge
折边
折边在电池生产过程中已完成，并通过了密封测试。
·禁止打开或破坏折边。
4.3 Mechanical shock
·Don’t Fall, hit, bend battery body
机械撞击
· 禁止坠落、冲击、弯折电池。
5. Notice

Designing Battery Pack
电池外壳设计注意事项
5.1 Pack design
·Battery pack should have sufficient strength and battery should be protected from mechanical shock
·No Sharp edge components should be inside the pack containing the battery.
外壳设计
·电池外壳应有足够的机械强度以保证其内部电芯免受机械撞击。
·外壳内安装电芯的部位不应有锋利的边角。
6. Notice

for Assembling Battery Pack
电池与外壳组装注意事项
6.1 Cell fixing
·The battery should be fixed to the battery pack by its large surface area.
·No cell movement in the battery pack should be allowed.
电池的安装
·应将电芯的宽面安装在外壳内；
·电池不得在壳内活动。
7. Others
其它事项
7.1 Prevention

of short circuit within a battery pack
Enough insulation layers between wiring and the cells shall be used to maintain extra safety protection.
7.2 Prohibition of disassembly
严禁拆卸电池
1）Never disassemble the cells
The disassembling may generate internal short circuit in the cell, which may cause gassing, firing, or other prob-
lems.
在任何情况下不得拆卸电池，拆卸电池可能会导致内部短路，进而引起鼓气、着火及其它问题。
2）Electrolyte is harmful
LIP battery should not have liquid from electrolyte flowing, but in case the electrolyte come into contact with the
skin, or eyes, physicians shall flush the electrolyte immediately with fresh water and medical advice is to be