Instructions / Assembly

9
www.homewerksww.com
ASSEMBLY INSTRUCTIONS
Wall switch
back view
Black
wire
Black
wire
Green
wire
Wall
switch
NIGHT
LIGHT
8
9
7. Secure the suspension bracket I (C) to fan
housing using screw (CC) (included).
Secure suspension brackets (D & E) with
screws (BB) (included).
8. Remove junction box cover. As shown in wiring
diagram on page 5, using quick connect ports
connect house wires to switch and fan.
Note: Do not use metal wall plate with the
switch, as it may cause interference with the
fan operation.
9. Connect a 4 in. circular duct and vent to the
outside. Secure it with duct tape or clamp
(not supplied).
Turn on power source. Test the fan.
7
1. Join the connectors for the BLUETOOTH
®
speaker (black wires), light (white wires), and
RF receiver (gray wires).
BLUETOOTH
®
SPEAKER FAN GRILLE INSTALLATION
Housing must be installed ush with ceiling board or the grille mounting spring will not be long
enough to insert into the slots inside the fan housing.
1