Instructions / Assembly

www.homewerksww.com

ASSEMBLY INSTRUCTIONS

2. Measure the opening to assure it is large

enough to accommodate the new fan

housing (9.4 in. x 9.4 in.).

3. If this fan is not replacing an old fan be sure

to cut a 9.4 in. x 9.4 in. opening for the fan

housing.

4. Insert suspension bracket onto fan housing

using suspension bracket I (C) and II (D). If

spacing between joists is 21.5 in. to 23.5 in.

attach suspension bracket III (E).

5. Position fan housing so edge of fan is ush

with sheetrock. Do not ush mount housing

with joist.

6. Secure the fan housing to joist with suspension

brackets using (AA) (included). (Joist spacing of

less than 21.25 in.)

9.4"

1 2